Help nakon rastavljanja i sastavljanja laptopa

[idaho]

Ovo sam pisao na engleskom i umoran sam od tražnje riješenja pa neću prevodit:
I have disassembled my HP nc2120 laptop following the HP’s manual. I’ve removed the battery, disassembled the hard drive, removed the external memory module, mini PCI communications module, optical drive, keyboard, but was unable to remove the switch cover and the led board because I don’t have the screwdriver,removed the fan and heat sink and cleaned them both. Removed the processor, didn’t remove the modem (because of the switch cover), removed the internal memory module and the RTC battery and tried removing the top cover but was unable (but I tried) because of the switch board and when I was screwing it back one screw was unable to hold tight and later some plastic fell out from the laptop. I didn’t replace the paste between the processor and the heat sink.
When I completed the reassembly step by step and tried to turn on my laptop it just won’t. When I press the power it starts the fan for a second and when I press it once more and it begins to start but after a second or two it dies.
Is there something I could do to resolve this problem?

Svaka pomoć je dobro došla, nesretan sam s tim lapotom.
Hvala svima

[raven]

kažeš da nisi skidao termo pastu između hladnjaka i procesora?
moguće je da je to uzrok, ako su se malo razdvojili prilikom rastavljanja, sad se pregrijava.

[idaho]

Moguće. Gdje u centru Zagreba mogu nabaviti tu pastu?

[industrial]

Makro mikro sva treba voliiii...ima paste

Links trešnjafka isto ima.

[raven]

sorry, tu ti ne mogu pomoći, nisam iz Zg. ali to bi trebala imat svaka trgovina informatičkom opremom.
uz to će ti biti potreban i fini brusni papir, zrnatost cca. 2000.

proguglaj malo, imaju na netu upute kako to napraviti kako spada.

[idaho]

Jel ima kakve veze ako mi je danima prije nego kaj sam ga išao rastavljat kada bih ga zagasio dao ovu poruku:

STOP: c000021a {Fatal System Error}
The windows log on process system process terminated unexpectedly with a status of 0x00000000 (0x00000000 0x00000000).
The system has been shut down.


?

[tuvok]

ovo označava grešku u memory block c000021a,trebao
si probati s repair,ako i dalje kenja
nanovo staviti windozere.

[Ineluki]

Ja sam svojedobno te stvari radio na prastarom računalu. Novoga sam samo dragao po monitoru.. Eto.

Savjet? Trk u servis dok nisi prouzročio još veću štetu...